Jordan Horizontal Electrophoresis Systems

Jordan Horizontal Electrophoresis Systems

Jordan Horizontal Electrophoresis Systems - Jordan JSB-30 Mini Gel-O System

THE JORDAN BRAND IS BACK!

The JSB-30 is a 7.5cm x 10cm mini gel in a .
horizontal format that will accommodate up .
to 18 samples per run. The ideal unit for PCR, .
fragment analysis or recombinant screening.
Constructed of heavy-duty 1/2" cast acrylic .
for years of dependable service.

The JSB-30 also provides the user with the .
option of running different length trays. There .
are two accessory gel trays and casting fixture .
trays offered for use in the JSB-30. One tray is .
5cm long and the other tray is 7.5cm long.
These trays are detailed below and can be .
purchased separately.

The GB-3010 is the UVT casting tray for the JSB-30 horizontal electrophoresis system. This tray is constructed of 1/4" thick, OP-1 cast acrylic to allow the passage of UV light for viewing the gel run.
The tray accommodates one comb, held in place by a comb holder (CH-30)
One GB-3010 is included with every JSB-30 system

The CS-3010 is the casting fixture tray that accommodates the GB-3010 UVT gel tray during the gel casting procedure, eliminating the need for messy tape.
The CS-3010 contains two sealing gaskets that hold the gel tray firmly in place, easily sealing the gel tray during the gel casting procedure.
One CS-3010 is included with every JSB-30 system.

The GB-3005 is an accessory UVT gel tray for the JSB-30. This tray will produce a gel measuring 7.5cm(W) x 5cm(L)
The GB-3005 is NOT included with the JSB-30 system but can be purchased separately.

The CS-3005 is an accessory casting fixture tray for the JSB-30.
This casting fixture tray accommodates the 7.5cm x 5cm UVT gel tray GB-3005.
The JSB-30 allows the user to choose from three different length gel trays.
This casting fixture is NOT included with the JSB-30 system. This tray must be purchased separately.
The CS-3005 contains two gaskets for sealing the UVT tray during the gel casting procedure, eliminating the need for messy tape.

The GB-3075 is an accessory UVT gel tray for the JSB-30 horizontal electrophoresis system. This tray produces a gel measuring
7.5cm(W) x 7.5cm(L). This tray is NOT included with the JSB-30 system.

The CS-3075 is a casting fixture that accommodates the GB-3075 during
the gel casting procedure. The CS-3075 contains two gaskets for sealing
the UVT casting tray eliminating the need for messy tape
The CS-3075 is an accessory casting fixture that is NOT included with the
JSB-30 horizontal elecrophoresis system.

Jordan Horizontal Electrophoresis Systems - Jordan JSB-302 Double-Wide Mini Horizontal System

THE CLASSIC DOUBLE WIDE MINI!

The Jordan JSB-302 utilizes a wider format
than the traditional mini-submarine electrophoresis
system. The JSB-302 Double-Wide can process a
large number of samples and is ideal for PCR,
fragment analysis or recombinant screening. The
JSB-302 can run up to 36 samples in less than
30 minutes!

Constructed of 1/2" thick cast acrylic, the
JSB-302 is designed to provide
years of continuous service.

The JSB-302 offers the user three different length
gel trays. The 10cm long tray comes with the unit
and the 7.5cm and 5cm long trays can be purchased
separately, along with their corresponding casting
fixture tray. These are detailed below.

The GB-3210 is a 15cm x 10cm UVT gel bed designed for use in the
JSB-302 horizontal system. The tray is constructed of OP-1 cast acrylic to allow the passage of UV light for viewing the gel.

A GB-3210 is included with every JSB-302 electrophoresis system.

The CS-3210 is a casting fixture tray that accommodates the GB-3210 Gel
tray during the gel casting procedure.
This eliminates the use of messy tape and allows the user to cast gels
outside the buffer tank. A CS-3210 is included with every JSB-302 system.

The GB-3275 is a UVT gel tray for use in the JSB-302 Double-Wide system
This tray is constructed of OP-1 cast acrylic to allow the passage of UV light
for viewing the gel. This tray measures 7.5cm in length and is an accessory
tray that can be purchased separately, it is not included with the JSB-302
system.

The CS-3275 is a casting fixture tray designed to accommodate the
GB-3275 UVT tray during the gel casting procedure. The CS-3275 contains
two gaskets for sealing the UVT gel tray while the user casts the gel.
Eliminating the need for messy tape
The CS-3275 is an accessory casting tray and is not included with the JSB-302 system.

The GB-3205 is an accessory UVT gel tray for use in the JSB-302 horizontal electrophoresis system. The tray is constructed of OP-1 cast acrylic to allow the passage of UV light for viewing the gel.
This tray is not included with the JSB-302 system, but can be purchased separately.

The CS-3205 is the casting tray designed to accommodate the GB-3205 UVT gel tray. The CS-3205 contains two gaskets for sealing the gel tray during the casting procedure. This eliminates the use of messy tape.
The CS-3205 is an accessory tray and can be purchased separately for use with the JSB-302 electrophoresis system and GB-3205 UVT tray.

Jordan Horizontal Electrophoresis Systems - Jordan JSB-96 Ultra-Wide Mini Horizontal System

THE CLASSIC ULTRA-WIDE HORIZONTAL!

The JSB-96 is designed for quick-screening
a large number of samples while utilizing a
limited amount of agarose (100ml). It is ideal
for for PCR RFLP analysis or plasmid screening.
The JSB-96 microtiter plate format can run all
samples as well as standards and blanks in
under 90 minutes. The microtiter-format combs
are designed for quick loading with a multi-channel
pipette. The combs accommodate multiple loading
by a micropipetter, leaving room for molecular
weight markers.

Constructed of 1/2" cast acrylic, the JSB-96 is
designed to provide years of continuous service.