MaxPette Pipette Controllers(Pipette Aid)

MaxPette pipette aid this innovative battery powered pipette controller in the range from 1 to 100 mL works in glass and plastic pipettes. MaxPette has been designed with the user in mind. It is located to the push button switch and a soft, lightweight, ergonomic handle has.

1 ML 100 ML pipette, work

Speed ​​and high aspirations to four seconds 25 ML

Eight consecutive hours, wireless operation

· Ergonomic design

You can set the suction velocity is high or the viscosity of the liquid to adjust the volume of the pipette and me. Suction is applied to the trigger button can be adjusted by the amount of pressure. Distributed by gravity to perform or step out and hit the pump empties the pipette can be supported by.

MaxPette all the PTFE filter and safety valve is protected from the entrance of the liquid by. To protect samples from cross-contamination, two filters and pipette holder are easily exchanged and autoclaved.

When fully charged, MaxPette continuously for 8 hours is available. Low battery indicator lights up, the unit needs to be charged. Pipette responsible consumption while working is simply to connect the power supply should continue batteries charged by hour and ten system is protected against. MaxPette the power supply / comes with charger and PTFE filter.

 

Product Specifications

mAXpette

Product Specifications	Maxpette
Weight	0.5 lb/0.21 kg
Battery life	2,000 pipetting cycles
Battery charging time	11 - 14 hours
Autoclavability	Nosepiece, pipette holder and filter
Pipette types	Glass or plastic, 1 to 100 ml
Electrical	85~245V, 50 Hz ~,60 Hz